Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[PIC] 89s52 LCD Initiallise programme

Status
Not open for further replies.
K

Kingenious

Newbie level 2
Newbie level 2
Joined
Feb 25, 2014
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
12
Hi
please help me with the LCD initialise programme with 89s52 using Keil uversion4, LCD data pins are connected to P2 of the microcontroller...RS connected to p3.0/RXD...RW connected to ground because i just want to write on the LCD
 

Ok its 2X16 LCD Lcd_0.jpg
and E connected to p3.2
 

Check this link
**broken link removed**
This is full tutorial about interfacing lcd with 8051 with c source code in keil
 
Kingenious said:
Hi
please help me with the LCD initialise programme with 89s52 using Keil uversion4, LCD data pins are connected to P2 of the microcontroller...RS connected to p3.0/RXD...RW connected to ground because i just want to write on the LCD
Click to expand...

what is the problem that you have ? is some thing not working ?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top