Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

8051 series development tool

Status
Not open for further replies.

MITSUKO

Member level 2
Joined
Jun 6, 2001
Messages
48
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
340
can anyone reccomend me a good design to develop hard en soft for the 80c32 .
i do have an eprom emulator
i'll be needing ad conversion frequency measuring lcd output etc .
thx

<font size=-1>[ This Message was edited by: MITSUKO on 2001-06-14 21:33 ]</font>
 

I think you could use Phillips 89C51RD2 with 20MHz.
 

If you have an eprom emulator you can also use a romless 8051 family member like 80C32 (easier to get and cheaper).

A 80C32 needs only an oscillator, eprom and adres latch to run. I use a 74HC573 as the datalatch. Datasheets can be found at:
**broken link removed**

Free tools (assemblers and disassemblers) are available at philips:
**broken link removed**
 

hi,

if you need a lot of i/o-ports try the dallas ds87c550.
The software problem will be solved with K*eil. Download the evaluation software !

Good luck

curgan :smile:
 

Attachments

  • INVT-2.GIF
    INVT-2.GIF
    308.7 KB · Views: 167
  • TL494-SMPS CHARGER.GIF
    TL494-SMPS CHARGER.GIF
    95.9 KB · Views: 153

I design uPLC/TB51 (an Emulator and training board for 8051).
It is very good for simulating hardware with 8051.
If you want, I upload its features.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top