Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

433MHz Antenna Matching Network

Status
Not open for further replies.
L

luis_rouco

Newbie level 2
Joined
Feb 6, 2008
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,292
antenna matching network

Hi all,
I'm new in RF designs and need a lot of help.
I'm going to add a RF module to an existing application, maybe RF650 from RF-SOLUTIONS, and I would like to know what must I consider and how to calculate the matching network for a 50ohm antenna.
Thanks a million in advance.
 

433mhz antenna

If you don't have any RF experience why don't use a 50 ohms antenna? In this case you don't need any matching network between transceiver and antenna.
 

    L

    luis_rouco

    Points: 2
    Helpful Answer Positive Rating
433 mhz antenna

Thanks vfone,
I thought a matching network should be needed even using a 50ohm antenna.
I will try with a 50ohm antenna directly attached to the RF module.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top