A CD4011B has buffered outputs so its outputs switch faster than a CD4069 that does not have buffered outputs.this screenshot was taken from two different Osc. CD4011 and CD4069, this is 1khz audio modulated to 38khz carrier from CD4066 pin# 2 and pin#3 using Oscilloscope.
The p-p voltage from CD4066 using CD4069 osc is higher than CD4011!!
which is much better CD4011 or CD4069?
A CD4069 has six logic inverters. A CD4011 has four logic inverters if the inputs of a gate are connected together. Use one or use the other one.can i use cd4011 or cd4069 as invert like the CD4013 and CD4027, they have non invert and invert!!
example CD4013 then output pin #1 is non inverted and the pin #2 is inverted! how to invert on CD4011 or CD4069?
Oops! my mistake - but the 4001 will work as I stated.
Brian.
Why would you connect the output of an electronic circuit to ground? To make heat and smoke?thanks!! how about the ouput of CD4001? is it ok if not connected to ground?
I presume you want to use photosensitive PCB subtrate? Should work with coated overhead transparency film (after complete drying). Not so well with transparent paper.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?