Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

36W FTL Electronic ballast- usage of other wattage lamp

Status
Not open for further replies.
saumya_85

saumya_85

Advanced Member level 4
Joined
Mar 18, 2009
Messages
107
Helped
6
Reputation
12
Reaction score
5
Trophy points
1,298
Location
INDIA
Activity points
1,948
FTL Electronic Ballast

I have a 36W FTL Electronic ballast. Could it be possible to put any other wattage lamp to its output?
 

FTL Electronic Ballast

lower u can use, for higher wattage lamp you need to modify ballast
 

FTL Electronic Ballast

Can we connect 2X18W instead of 36W FTL Electronic Ballast?
 

FTL Electronic Ballast

Why not? 2x18W is theoretically the same as 36W. It should work.

Added after 15 minutes:

Just make sure you connect the two lamps in parallel, that is across each other.
 

FTL Electronic Ballast

I have some doubt for the ignition of the two lamps.

How can be it is possible ?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top