Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

3 bit flash adc circuit and its corresponding waveform

Status
Not open for further replies.

Aritra17

Junior Member level 3
Joined
Feb 20, 2011
Messages
30
Helped
4
Reputation
8
Reaction score
2
Trophy points
1,298
Location
kolkata
Activity points
1,610
pls mail me a 3bit flash adc circuit and its corresponding waveform

i'm doing this project in tanner eda

i have got the comparator output good

but i can't figure out the whole circuit&i dont know what will be its output

searched through google a lot, but couldn't get any useful information
pls help
 

thanks klyston, but i knew that in a flash adc there are

(2^n) no of resistors and

((2^n) -1) no of comparators,

n=2 in this case(as per your circuit)

so the no of resistors should be 4

and the no of comparators should be 3

isn't it so?

&what should be the output of the flash adc?
 

output.jpg

klystron

this is the output as per your circuit of 2bit adc
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top