Jan 12, 2016 #1 B Bou Full Member level 3 Joined Mar 6, 2013 Messages 159 Helped 0 Reputation 0 Reaction score 0 Trophy points 16 Activity points 0 Hello, I simulated an antenne with ADS software that can gives the 3D radiation pattern. For the 2D radiation pattern I have to identify 2 plane .... How we can choose these planes XY XZ.... And why we can choose a plane and not another.... there is sevral planes that we can choose and Im confused for my report please help
Hello, I simulated an antenne with ADS software that can gives the 3D radiation pattern. For the 2D radiation pattern I have to identify 2 plane .... How we can choose these planes XY XZ.... And why we can choose a plane and not another.... there is sevral planes that we can choose and Im confused for my report please help
Mar 23, 2016 #2 F Feitoza Newbie level 5 Joined Feb 24, 2012 Messages 9 Helped 5 Reputation 10 Reaction score 5 Trophy points 1,283 Activity points 1,392 When in post-processing, go to the tab "Far Field Cut" and enable it. You can see the XY plane by choosing theta = 90º, for instance, or the YZ plane by choosing phi = 90º, and so on.
When in post-processing, go to the tab "Far Field Cut" and enable it. You can see the XY plane by choosing theta = 90º, for instance, or the YZ plane by choosing phi = 90º, and so on.