Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

how to plot permittivity, permeabilitty and index "n" with CST2010?

Status
Not open for further replies.
M

mitch81

Member level 1
Joined
Nov 17, 2008
Messages
34
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
1,503
hi
i want to plot a function of frequency of the permittivity, permeabilitty and refraction index "n" of an unit cell with CST microwaves 2010 (see figure below).
i can just represente S11 and S21, impedance Z.

can anyone help me please!
 

Attachments

  • unit omega cell.JPG
    unit omega cell.JPG
    31.8 KB · Views: 158

hi
i never done before this but i saw this CST tutorial u can download from attach file
 

Attachments

  • CST_APPLICATION%20NOTE__PERIODIC%20ARRAYS%20(FSS%20,%20PBG).pdf
    1.2 MB · Views: 262
thank you ferdow

---------- Post added at 15:03 ---------- Previous post was at 14:50 ----------

this tutorial is very interesting, but it don't presents permittivity and permeability just the S parameters.
 

hi
read this paper in that shows that formula u need
MICROSTRIP ANTENNA'S GAIN ENHANCEMENT USING LEFT-HANDED METAMATERIAL STRUCTURE
H. A. Majid, M. K. A. Rahim, and T. Masri Progress In Electromagnetics Research M, Vol. 8, 235{247, 2009
i hope it useful for u pls say if useful i like to know about that
my email:ferdows_j@yahoo.com
 
thank you so much ferdows, i will try to export the S parameters to mathlab and see... thank, i notified your e-mail.
 

hi
pls send me your result and simulation to i understand more about this
 

I have a first problem!
The expressions of permittivity and permeability are given by complex S parameters (i think)!!!
But CST gives S magnetude (linear) and S(dB)!
What's the S paramters that you exported?

i will absolutly send you result... thank you for all

"sorry for my english! i speak french."
 

hi ferdow
it's really difficult to export complex S parameters from CST, i used finally HFSS because you have possibility to enter equation and obstain all paramaters you need! it's very simple with HFSS
 
Hi Mitch81,

I am facing a problem same as u. would you mind to share with me how you solve that problem and what is your finding.
may be you can email me something helpful.
mkezambo@gmail.com

best regards
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top