Disha Karnataki
Full Member level 5
I am making a solar panel cleaning robot and want to select appropriate motor for the selected roller brushes for the cleaning.
The brushes are as shown: https://3.imimg.com/data3/MN/MJ/MY-8076819/roller-brushes-250x250.jpg
The dimensions of brushes are: InnerDia:0.7",Outer dia(along with bristle):4.3",bristel(made of teflon) thickness:2mm, length of brush:12"
I read some papers which conducted analysis in saudi arabia for soiling effect and there was 35% effeciency reduction in o/p for 300um dust accumulation on the panels and after applying force of 0.15N to 0.3N tangentially(they rubbed/scratched the surface) along the surface they could remove the dust and could increase the effeciency so, now I want to accomplosh this cleaning using roller brushes how do I go about selecting the motors?
The brushes are as shown: https://3.imimg.com/data3/MN/MJ/MY-8076819/roller-brushes-250x250.jpg
The dimensions of brushes are: InnerDia:0.7",Outer dia(along with bristle):4.3",bristel(made of teflon) thickness:2mm, length of brush:12"
I read some papers which conducted analysis in saudi arabia for soiling effect and there was 35% effeciency reduction in o/p for 300um dust accumulation on the panels and after applying force of 0.15N to 0.3N tangentially(they rubbed/scratched the surface) along the surface they could remove the dust and could increase the effeciency so, now I want to accomplosh this cleaning using roller brushes how do I go about selecting the motors?