Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

inductor modeling in Hspice [urgent]

Status
Not open for further replies.
sudip

sudip

Junior Member level 2
Joined
Apr 26, 2007
Messages
22
Helped
8
Reputation
16
Reaction score
8
Trophy points
1,283
Location
Bangalore
Activity points
1,416
dear friends,
I'm designing a LNA for my wi-fi mixer and simulating it using Hspice, I'm using MOSIS 035 tsmc tech file; but the problem is I dont know how to model a inductor of Q = 6, L = 0.5nH, ωT = 1.6 GHz; and which parameters I need from that model file and how to use in calculation, I'm a new member so dont have enough points to download materials if you have any information regarding this kindly forward me to "sarkar1983(at)gmail.com". Thanx in advance.
regards
Sudip :?:
 

sudip said:
dear friends,
I'm designing a LNA for my wi-fi mixer and simulating it using Hspice, I'm using MOSIS 035 tsmc tech file; but the problem is I dont know how to model a inductor of Q = 6, L = 0.5nH, ωT = 1.6 GHz; and which parameters I need from that model file and how to use in calculation, I'm a new member so dont have enough points to download materials if you have any information regarding this kindly forward me to "sarkar1983(at)gmail.com". Thanx in advance.
regards
Sudip :?:
Click to expand...

Look at h**p://www.elab.ntua.gr/sisp/Inductor_Modeling/inductor_modeling.html

(replace * with t).

If it is too complicated come back.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top