Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to get a FM modulated signal in ADS

Status
Not open for further replies.
O

oasis4355

Member level 3
Joined
Feb 28, 2006
Messages
67
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,801
Hi all,

I'm trying to have a FM modulated signal from ADS. I've gone through the source for modulated signal, there are CDMA, GSM, pluse...but no FM...

How should i proceed? Please advice.

Thanks in advance

Danny
 

There is one there, I've seen it. I don't remember what component pallet it's on. Look at all the timed sources to start with. It's not in one of the protocol specific sections.

Dave
 

in ads in the menu system mod/demod
use the FM modulator to get ur desired signal

khouly
 

Hi all,

I've found the FM modulation pallet,
however, there are 3 pins for the pallet, RF in, RF out and MOD in.

I understand that RF in will be my modulating signal, RF out will be the FM modulated signal. For MOD in, what should i put there?

Thanks in advance
 

the signal that will modulate the carrier , so that the moduletor generate the FM

khouly
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top