Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

The technology behind paper batteries

Status
Not open for further replies.
Paper Battery????

Battery Handbook may be tried..
 

Re: Paper Battery????

Try this one:
"Urine-activated paper batteries for biosystems"
Abstract
The first urine-activated laminated paper batteries have been demonstrated
and reported in this paper. A simple and cheap fabrication process for the
paper batteries has been developed which is compatible with the existing
plastic laminating technologies or plastic molding technologies. In this
battery, a magnesium (Mg) layer and copper chloride (CuCl) in the filter
paper are used as the anode and the cathode, respectively. A stack consisting
of a Mg layer, CuCl-doped filter paper and a copper (Cu) layer sandwiched
between two plastic layers is laminated into the paper batteries by passing
through the heating roller at 120 ◦C. The paper battery is tested and it can
deliver a power greater than 1.5 mW. In addition, these urine-activated
laminated paper batteries could be integrated with bioMEMS devices such
as home-based health test kits providing a power source for the electronic
circuit.

The rest of this document you can download by yourself; here is the link:
**broken link removed**

Regards,
IanP
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top