Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Spiral Antenna in HFSS!!!

Status
Not open for further replies.
S

safwatirteza

Junior Member level 2
Joined
Apr 28, 2006
Messages
22
Helped
3
Reputation
6
Reaction score
1
Trophy points
1,283
Activity points
1,430
hi,
I am uploadin a HFSS file from my projects ... but this spiral antenna seems to v pblm can nebody rectify these pblm .. it give initial mesh .. mesh3d error ...i used a rectangle first and then made the spiral through the spiral command in panel .. the 3dmodel validation is also .. i m using hfss9.2 plz help me ...
Regards Safwat
 

hi,
i just checked your model and found that it can be simulated in my computer after i set the frequency sweep range ,and there were no problems u said.
try it again.
i just used HFSS9.2

Regards gw_uestc
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top