DavidYebadlo
Junior Member level 1
Hi,
I need to calculate and draw asymptotes on the oscilloscope.
The tested system looks as follows:
One change - Rc = 20k Ohms.
I know that for voltage Ub1 in range for +-0.1V (approximately) transistor T2 is in the active mode. And i notice that Uwy1 is constant and this voltage is 5V. So transistor T1 is in cut-off mode. But i don't know how T2 transistor works when Ub1 voltage is less than -0.1V and when Ub1 voltage is greater than 0.1V. Does it work in saturation mode? Could you explain me?
Thanks for the help in advance!
I need to calculate and draw asymptotes on the oscilloscope.
The tested system looks as follows:
One change - Rc = 20k Ohms.
I know that for voltage Ub1 in range for +-0.1V (approximately) transistor T2 is in the active mode. And i notice that Uwy1 is constant and this voltage is 5V. So transistor T1 is in cut-off mode. But i don't know how T2 transistor works when Ub1 voltage is less than -0.1V and when Ub1 voltage is greater than 0.1V. Does it work in saturation mode? Could you explain me?
Thanks for the help in advance!