Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

when can you perform skywave propagation?

Status
Not open for further replies.

dl09

Full Member level 4
Joined
Feb 12, 2020
Messages
226
Helped
2
Reputation
4
Reaction score
1
Trophy points
18
Activity points
1,692
can skywave propagation be performed every day and every night?
 

Yes, it doesn't depend on the time of the day.
Radio waves travel in straight lines so they can't directly be heard over the horizon (~40 miles but it depends on the antenna height above ground). However, there are several layers in the upper atmosphere that are to some degree reflective and waves hitting them will be bounced back, often making the signal reach beyond the horizon although not necessarily along the whole distance. There can be gaps before the reflection lands again. How reflective the layers are depends on many factors including temperature, air pressure and radiation levels from the Sun. The layers tend to contract (become closer to the ground) at night as it cools down and then expand back again during the day. If you listen on a MW domestic radio you will notice it picks up far more stations at night as the reflective layers get closer,

Brian.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top