Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Ultrasound communication system

Status
Not open for further replies.
S

Saboy

Newbie level 5
Joined
Mar 9, 2005
Messages
9
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,348
ultrasound communication

I want to build an ultrasound communication system. Any references you can provide will be appreciated.

Added after 2 minutes:

Some person used DSP to decode the signal. But what i consider is power consumption. Can you recommend one low-power solution? Thanks.
 

+project +ultrasound communication system

won't a FPGA do the job better than the DSP as most of the calculation can be done concurrently. If you want low power, you can reduce the amount of logic use and if time is not an issue as well.
 

ultrasounds communication

Check this: **broken link removed**
Maybe you can get some idea from that project
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top