sonar_abhi
Member level 1
Hi all,
I want to build a series/parallel combination of solar panels.
The panels I propose to use have to be connected in series (6S configuration) to attain a voltage of around 200V DC to drive a motor.
While I also have a battery bank to be charged at 48V DC. I want to connect the panels in a 2S3P configuration.
If I use a MOSFET to do the switching, the MOSFET pins are connected to the same potential hence the MOSFET doesnt switch ON. I am not sure if I can use an SSD to do the switching.
Can anybody help or guide me on the above problem on if I can use Mosfets the way I have described them?
Thank you
I want to build a series/parallel combination of solar panels.
The panels I propose to use have to be connected in series (6S configuration) to attain a voltage of around 200V DC to drive a motor.
While I also have a battery bank to be charged at 48V DC. I want to connect the panels in a 2S3P configuration.
If I use a MOSFET to do the switching, the MOSFET pins are connected to the same potential hence the MOSFET doesnt switch ON. I am not sure if I can use an SSD to do the switching.
Can anybody help or guide me on the above problem on if I can use Mosfets the way I have described them?
Thank you