+ Post New Thread
Results 1 to 3 of 3
  1. #1
    Newbie level 4
    Points: 546, Level: 4

    Join Date
    Aug 2016
    Posts
    6
    Helped
    0 / 0
    Points
    546
    Level
    4

    Regarding .lis file generation in HSPICE.

    Hi

    When I simulate the .sp file using HSPICE, I get .ic0, .st0, and .tr0 files as a result after the simulation.
    May I know, why I am not getting the .lis file in addition to the above other mentioned files?

    Thanks
    Amit

    •   AltAdvertisement

        
       

  2. #2
    Advanced Member level 5
    Points: 17,262, Level: 31
    pancho_hideboo's Avatar
    Join Date
    Oct 2006
    Location
    Real Homeless
    Posts
    2,661
    Helped
    714 / 714
    Points
    17,262
    Level
    31

    Re: Regarding .lis file generation in HSPICE.

    You have to specify output logfile as option of hspice command.

    % hspice aho.sp -o boke.lis


    1 members found this post helpful.

    •   AltAdvertisement

        
       

  3. #3
    Newbie level 4
    Points: 546, Level: 4

    Join Date
    Aug 2016
    Posts
    6
    Helped
    0 / 0
    Points
    546
    Level
    4

    Re: Regarding .lis file generation in HSPICE.

    Thanks a lot for your kind reply, it worked...

    I also found that another command, "hspice <filename>.sp > <filename>.lis" can also be used to generate .lis file.

    Just an additional thing, I would like to know that in the lis file details, the "Total CPU time" is shown as 0.00s (probably it is in ms). May I know, how can I look for the Total CPU time, if it is say is in "ms"?



--[[ ]]--