Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Pdiff guard ring around nmos4?

Status
Not open for further replies.
M

MaryF

Newbie level 4
Joined
Aug 16, 2018
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
97
Hello,

Is it possible to connect a pdiff gard ring around a NMOS4 to a potential different from ground?

I tried it anyway and have gotten this DRC error:
"VART MIN_Element Rule : vart min length = 2.0" besides that of a "BAD_NWELL_WELLTAP_MULTICONN_ERC"

I appreciate any suggestions ...

Thanks
 

In standard JI CMOS the substrate will be tied to most negative
potential (perhaps some very special cases to the contrary).
Any P+ in P- substrate will have an ohmic ground connection.
You would have to provide the current, to establish any
voltage difference, and substrate current is generally not a
good thing.

A twin-well technology or SOI, would give you additional
freedoms at additional cost.
 
  • Like
Reactions: MaryF

    M

    MaryF

    Points: 2
    Helpful Answer Positive Rating
Hi,

Is it the case that your NMOS4 has a substrate at different potential than ground?
if so then you have to use local dedicated substrate not the global P sub. For that you can use deep N-well. It is the layer we use in the circumstance where the body of the mos is connected to the different potential tank vdd or ground.
Uses dnwell layer inside that a nwell + guard ring and inside guard ring NMOS4. Now you can connect this guard ring to any desire voltage you want to.

Best Regards,
Sagar
 
  • Like
Reactions: MaryF

    M

    MaryF

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top