ajit_nayak87
Member level 5
I have attached my display icon here.
I would like to change the color of Below Text in one color and display paramter in other colors. In below display parameter
MODE: TIME: TimeZone:Relay_Status : Must be in one color Other parameter like AUTO/MANUAL,15:55:55,Timezone1/Timezone2/Timezone3/Timezone4
ON/OFF must be another color.
My code look like below. I could not able to change color.
display.setTextColor(BLUE); if i use the screen will get blackout.
I would like to change the color of Below Text in one color and display paramter in other colors. In below display parameter
MODE: TIME: TimeZone:Relay_Status : Must be in one color Other parameter like AUTO/MANUAL,15:55:55,Timezone1/Timezone2/Timezone3/Timezone4
ON/OFF must be another color.
Code:
MODE: AUTO/MANUAL
TIME: 15:55:55
TimeZOne: Timezone1/Timezone2/Timezone3/Timezone4
Relay_Status:ON/OFFMy code look like below. I could not able to change color.
display.setTextColor(BLUE); if i use the screen will get blackout.
Code:
#include <SPI.h>
#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>
#define OLED_RESET LED_BUILTIN //4
Adafruit_SSD1306 display(OLED_RESET);
#define BLUE 0x001F
#define RED 0xF800
#define GREEN 0x07E0
#define CYAN 0x07FF
#define YELLOW 0xFFE0
void setup()
{
Serial.begin(115200);
display.begin(SSD1306_SWITCHCAPVCC, 0x3C);
display.clearDisplay();
display.display();
display.setTextSize(1);
display.setTextColor(WHITE);
display.setCursor(0, 0);
// timer.setInterval(1000, Display);
}
void loop()
{
Display();
}
void Display()
{
Chk_manual_Auto_Status();
display.setCursor(0, 0);
//display.clearDisplay();
display.print("MODE:");
if (manual == 0)
{
//display.setTextColor(WHITE);
display.clearDisplay();
display.println("AUTO");
display.display();
//display.setTextColor(BLUE);
} else
{
//display.setTextColor(WHITE);
display.clearDisplay();
display.println("MANUAL");
display.display();
// display.setTextColor(BLUE);
}
display.print("TIME:");
//display.clearDisplay();
display.println(currentTime);
display.display();
//display.setTextColor(WHITE);
display.print("TIME_ZONE:");
display.println(TimeZone_Status);
display.display();
display.print("RELAY STATUS:");
if (Relay_Status == 1)
{
display.println("ON");
display.display();
} else
{
display.println("OFF");
display.display();
}
delay(2000);
}
arduino-uno arduino-esp8266 ad