Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Procedure of remapping of axis for BHI160

Status
Not open for further replies.
N

nikunjtanna

Newbie level 1
Joined
May 28, 2018
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
9
Hi,

We are using BHi 160 for our application and we can successfully get the sensor data to our controller. Currently we have soldered the BHi 160 on the bottom layer of our hardware and its position is P7 according to the datasheet of BHI 160. We have by default fw file which is for P0 position. I just want to know how to change and generate new fw file for P7. There are few methods. One method involves the use of SDK but we do not have SDK. Can anybody tell us how to get SDK? Another method is to change through API. Can anybody guide us on how to do that and where do we need to change the driver?

Thanks
Nikunj Tanna
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top