Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[help] preamplifier before the comparator

Status
Not open for further replies.
S

skyeaglemm

Newbie level 6
Joined
Jan 14, 2005
Messages
11
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
82
question: a 6 bit 2 GSamples/s flash A/D converter with Vref = 1V. It uses an array of preamplifiers followed by a comparator array.
(a)The comparator can resolve a 50mV difference at its input to full logic levels at its output. What is the gain required in the preamplifiers?

soution:VLSB=Vref/64=15.6mV,minimum input to preamplifiers=VLSB/2,which must be amplify to 50mV. So gain=6.4

i am confused why minimum input to preamplifiers=VLSB/2. if vin=15mv, the input to the first preamplifiers is just 15.6-15=0.6mv<<15.6/2 mv,right? [/img]
 

The minimum requirement for the ADC to be solved is 1/2LSB. In your case, the 1LSB=15.6mV. So the mininum vlotage difference that can be recognized is 7.8mV. When your input is 15mV, the correct output is 6'b000001. Because the input pass the first criteria of the first comparator in Flash ADC. For the second comparator to be output by 1. your input needs to be larger than 7.8+15.6 mV.


Yibin.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top