+ Post New Thread
Results 1 to 3 of 3
  1. #1
    Member level 1
    Points: 1,684, Level: 9

    Join Date
    May 2004
    Location
    US
    Posts
    36
    Helped
    0 / 0
    Points
    1,684
    Level
    9

    eagle file converting to gerber files

    Hi,

    I have some files generated in Eagle: psu.brd and eagle.epf. can i import these fileS with Camtiastic or viewmate to generate Gerber file as well as makE some changes?

    Thank you.

    •   AltAdvertisement

        
       

  2. #2
    Advanced Member level 2
    Points: 10,842, Level: 24
    M!k's Avatar
    Join Date
    Apr 2002
    Posts
    682
    Helped
    120 / 120
    Points
    10,842
    Level
    24

    Re: help for converting eagle file to Gerber file

    Generate the gerber files in Eagle using the CAM Processor. Then these files can be imported and edited by your favorite gerber viewer. But why do you want to modify the layout in the gerber editor? Just do the changes in Eagle before.


    Mik



    •   AltAdvertisement

        
       

  3. #3
    Member level 3
    Points: 2,343, Level: 11

    Join Date
    Mar 2004
    Location
    Mumbai,India
    Posts
    64
    Helped
    6 / 6
    Points
    2,343
    Level
    11

    Re: help for converting eagle file to Gerber file

    Hi,

    This link may helps you making your geber file from the *.brd file.

    http://www.interq.or.jp/japan/se-inoue/e_eagle.htm

    Regards

    Sadashiv



--[[ ]]--