Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Adapter to program AT89C5131 PLCC 52 pin

Status
Not open for further replies.
V

vasureddym

Member level 2
Joined
Jan 7, 2005
Messages
51
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
424
plcc52 plcc44 adapter

hi
i need the Adapter connector details to program AT89C5131 PLCC 52.
I'm using Advantech LabTool 48XP programmer. As per the programmer, it requires the adapter with part number '52PL/40D-ZAL-T89C5131' ; it is PLCC52 to DIP40 adapter.
Does some one have the schematic of this adapter, like the PLCC pin to DIP pin connection diagram.

thanks in advance,
regards,
srinivas

Added after 2 hours 42 minutes:

hi! mik has responded this question at
Adapter to program AT89C51RD2 PLCC 44 pin in ALL-11.

I further extend this discussion; had some one know the schematic for '52PL/40D-ZAL-T89C5131'.
regards
srinivas
 

Re: plcc52 plcc44 adapter

vasureddym said:
hi
i need the Adapter connector details to program AT89C5131 PLCC 52.
I'm using Advantech LabTool 48XP programmer. As per the programmer, it requires the adapter with part number '52PL/40D-ZAL-T89C5131' ; it is PLCC52 to DIP40 adapter.
Does some one have the schematic of this adapter, like the PLCC pin to DIP pin connection diagram.

thanks in advance,
regards,
srinivas

Added after 2 hours 42 minutes:

hi! mik has responded this question at
Adapter to program AT89C51RD2 PLCC 44 pin in ALL-11.

I further extend this discussion; had some one know the schematic for '52PL/40D-ZAL-T89C5131'.
regards
srinivas
Click to expand...
You can buy low cost board see for example www.easy-controller.com & ech.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top