Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

High voltage to Logic level shifting

Status
Not open for further replies.
M

Mahen K

Newbie level 4
Joined
Nov 11, 2009
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
India
Activity points
1,320
will this circuit work? All NPN transistor switching circuits I have seen switch higher voltages from lower voltages (at base). Here, I need to switch 3.3V with 12V. i.e When no voltage at base Vout should be high (3.3V) and when 12V at base Vout should be Low (0V).

Thanks
mahenk
 

Attachments

  • sch.jpg
    sch.jpg
    19.7 KB · Views: 98

That circuit should work fine. Since the normal rule-of-thumb is to use a base current of at least 1/10 of the collector current to saturate the transistor, any base resistor (R75) of 330k or less will work.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top