Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Need a high speed cheap usb AVR programmer

Status
Not open for further replies.
vinodstanur

vinodstanur

Advanced Member level 3
Joined
Oct 31, 2009
Messages
751
Helped
114
Reputation
234
Reaction score
114
Trophy points
1,333
Location
Kerala (INDIA)
Activity points
7,054
Hi,
I have avr dragon and the vusb usbasp programmer with me. But I need some thing simple similar to the usbasp but it should be much faster so that it will not take much time to load a 1MB or 256KB of flash. Is there any one already did it in PIC18F with USB hardware?
 

Most USBASP programmers can program much faster, but are set lower in case the microchip doesn't have fuse bits for faster speeds.... Sometimes there is a jumper on better USBasp that can improve speeds, but obviously read the data sheet, the jumper might be for something else like voltage etc....
 


Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top