Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Interfacing Potentiometer with 8052(89c52)Atmel uC

Status
Not open for further replies.
imranahmed

imranahmed

Advanced Member level 3
Joined
Dec 4, 2011
Messages
817
Helped
3
Reputation
6
Reaction score
3
Trophy points
1,298
Location
Karachi,Pakistan
Activity points
6,492
How do I connect or interface potentiometer.
Can anyone interested to answer me?
Thanks.
 

Through an ADC peripherial of course...
 
The 83c752 uses the same instruction set as the other 8051, however it has additional peripherals, including an ADC module, which the baseline 8051s do not possess.

To make use of the additional peripherals requires the configuration and manipulation of additional registers.

I recommend obtaining and reading a copy of the 83c752 datasheet:



However, datasheet from the actual manufacture would be more appropriate.

I should also add that many of these particular 8051 variants are either One Time Programmable (OTP) or require erasure with UV via a quartz cap window.

BigDog
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top