Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Effect of Temperature on mobility of electrons

Status
Not open for further replies.

archunan_m

Newbie level 3
Joined
Jul 22, 2011
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,309
How the change in temperature affects the mobility of electrons in a MOS????
What is a fast transistor and slow transistor????
Can someone explain pls,,,,,
 

How the change in temperature affects the mobility of electrons in a MOS????
What is a fast transistor and slow transistor????
Can someone explain pls,,,,,

1. Mobility of charge carriers (electrons and holes) is determined by several scattering mechanisms (scattering is a change in a direction and sometimes energy of carriers caused by imperfections): phonon scattering (by optical and acoustical phonons), ionized impurity scattering, surface scattering, remote charge scattering, etc. Phonon scattering is strongly temperature-dependent since the number (density) of phonons increases with temperature (it follows Bose-Einstein distribution). Usually, mobility decreases with temperature increase.

2. Due to inevitable manufacturing variations (change in implant doses and doping profiles, oxide thickness, etc.) device characteristics change - wafer-to-wafer, lot-to-lot, etc. (global variations). Thus, some transistors will have low Vt and high current ("fast" transistors), and some - high Vt and low current ("slow" transistors). These variations are described in terms of "corners" - Fast (F), Slow (S), and Typical (T), both for n-type and p-type devices - thus the transistor "corners" are defined by pairs - FF, SS, FS, TT, ...
 
Regarding the temperature behavior, keep in mind that the threshold voltage is also a function of temperature. It decreases with temperature.
Therefore, there are effects: (i) The decrease of mobility with Temp, and (ii) decrease of VTH with temperature. Please, note that both effects lead to different situations. In (i), the drain-source current is decreased. In (ii) is increased.
Which effect dominates?! It depends on the bias conditions. For VGS < Vx (a specific value, the effect of (ii) is more relevant.
Regards.
Regarding the temperature behavior, keep in mind that the threshold voltage is also a function of temperature. It decreases with temperature.
Therefore, there are effects: (i) The decrease of mobility with Temp, and (ii) decrease of VTH with temperature. Please, note that both effects lead to different situations. In (i), the drain-source current is decreased. In (ii) is increased.
Which effect dominates?! It depends on the bias conditions. For VGS < Vx (a specific value, the effect of (ii) is more relevant.
Regards.
 
With temperature rises, MOS resistance will increase usually.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top