+ Post New Thread
Results 1 to 4 of 4
  1. #1
    Member level 3
    Points: 728, Level: 5

    Join Date
    Oct 2010
    Posts
    63
    Helped
    6 / 6
    Points
    728
    Level
    5

    What's the best use of Mesh Operation for increasing the accuracy of a simulation?

    I am designing rfid tag antennas(860-960 mhz) using hfss 12.1, can someone help me whats the best use of Mesh Operation function for increasing the accuracy of the simulation? thanks

    •   AltAdvertisement

        
       

  2. #2
    Full Member level 6
    Points: 3,285, Level: 13

    Join Date
    Dec 2009
    Location
    land of the free
    Posts
    345
    Helped
    194 / 194
    Points
    3,285
    Level
    13

    Re: What's the best use of Mesh Operation for increasing the accuracy of a simulation

    Set it up correctly and it will be correct. For 99% of simulations, mesh operations are not necessary. Mesh operations tend to way over solve (university students tend to over use them), and then the user blames the software for excessive resource usage and solve times. Also, be aware of the measurement error for the antenna to be designed and do not force "accuracy" that exceeds your capability for measurement error.

    As an aside, you will want to converge on re and im Z rather than S since your RFID antenna is likely being designed to match a strongly complex IC load. Look up expression cache in the HFSS help.

    Have fun :)


    1 members found this post helpful.

    •   AltAdvertisement

        
       

  3. #3
    Member level 5
    Points: 1,642, Level: 9
    Achievements:
    7 years registered

    Join Date
    Dec 2010
    Location
    Belgium
    Posts
    87
    Helped
    21 / 21
    Points
    1,642
    Level
    9

    Re: What's the best use of Mesh Operation for increasing the accuracy of a simulation

    Also, have a look at this:

    https://www.edaboard.com/thread201072.html

    Good luck



    •   AltAdvertisement

        
       

  4. #4
    Member level 3
    Points: 728, Level: 5

    Join Date
    Oct 2010
    Posts
    63
    Helped
    6 / 6
    Points
    728
    Level
    5

    Re: What's the best use of Mesh Operation for increasing the accuracy of a simulation

    thanks for guiding, I got the point



--[[ ]]--