Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

power requirement of LO in LNB

Status
Not open for further replies.
S

sunshineshuvo

Newbie level 4
Joined
Nov 5, 2010
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,326
hello,
i need to determine the LO power in an LNB. i have the following values:
received power=-117 dBW; poise power -128dBw; Noise figure of LNB=1dB; LNA gain=50dB.

How can i use these info to relate the LO power.

thanks in advance

Reza
 

No relationship. Mixer LO power is a function of the mixer design. If it is totally pasive mixer, the LO power will be a function of desired signal handling capability.

a side, LNA gain of 50 db is very high. If you are able to keep it stable you will likely have other issue with larger nearby frequency signals overloading mixer.

You are better off getting gain after the mixer where you can reduce the bandwidth, thereby eliminating other unwanted signals before amplifing them.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top