Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

19 Hole paper jammed in HP LaserJet 6

Status
Not open for further replies.
S

sleuth04

Newbie level 1
Joined
Apr 27, 2004
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
8
We ran 19 hole punched paperthrough our HP LaserJet 6 and it got stuck. We were able to pull the paper out through the paper path but a small piece seems to be left behind. Now every time we try to print there is a paper jam. We can't see any paper sticking out so we are thinking we must dis-assemble the unit to get at it.

Does anyone have any info on hoiw we can do this ourselves?
 

Unscrew the 2 screws on the top (accessed by opening the toner door) and the 3 at the back.

Then you need 15 pairs of hands to unclip & lift the cover off.

The rest is just common sense in removing what you can to get at it, its in there somewhere...
 

The front is a bear if the paper is stuck there. Both side panels need to come off and the 8 or so screws in front. Unhook the connectors that go to the paper sensor and paper feed coil and your almost there.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top