Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
IanP said:Set the AVR’s UART for, say 9600, 8-bit, no-parity, 1-stop ..
https://extremeelectronics.co.in/avr-tutorials/using-the-usart-of-avr-microcontrollers/
At the PC end, open Hyperterminal and set for the same as above ..
Can I assume that you don’t have any issues with the hardware connection ..
The link below shows how to use the ADC:
https://extremeelectronics.co.in/avr-tutorials/using-the-analog-to-digital-converter/
You can send string that contains raw data or you can convert raw data into ASCII so when it appears on the hyperterminal screen it is easy to read ..
At the end of each string add “0D”h and “0A”h, this combination of control characters will return the cursor on the PC’s screen to the beginning of the next line ..
Example:
<ADC1H><ADC1L>,<ADC0H><ADC0L>, 0Dh, 0Ah
Rgds,
IanP