Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Maximum voltage in a breadboad?

Status
Not open for further replies.
southafrikanse

southafrikanse

Junior Member level 1
Joined
Jun 12, 2007
Messages
15
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Amora, Portugal
Activity points
1,418
Hello.

What are the maximum specifications for a simple breadboard?

Can I connect 220V to it?
 

Yes you can. I all time use 220 V on may breadboard for rectifiers and power supplier projects. Just be carreful.
 

Sure you can.

I usually apply 600V to bread board or PCB with curve tracer.

Regards
 

In my opinion, the BreadBoard should be used for max 0.5A at 50V. The use of a breadBoard for higher level is not safe. If it works for a level, that does not means it is good for that level.
 

just be aware that the back side of the breadboard is a thin adhesive plastic.

2000 volts will probably punch through it, but only when you least expect it
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top