Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

what is the difference between positive and negative layer?

Status
Not open for further replies.
L

liletian

Full Member level 6
Joined
Mar 5, 2008
Messages
337
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,298
Activity points
3,790
Hi Guys
When I submitted my design, I have to specify is the layer is positive or negative. I know I have to use positive layer. But what is the difference between positive and negative layers?
Thanks,
B
 

If you have a positive layer, you can create a positive mask. That means that the transparent film that the artwork gets printed on (for the photolithography tool), is opaque (black ink) where the copper/conductors/polygons will be. If you had a negative layer, then the mask would turn out being all black; except where the traces would be, it would be clear.

Positive and negative layers are identical in terms to the photography terms. In black & white photos, the negatives (developed film) were inverted from the colors on the final photograph.
 

Positive = Anything drawn on that layer represents material (copper, solder paste, ink)
Negative = Anything drawn on that layer represents absence of material (opening in solder mask)
 
kevin54 said:
Positive = Anything drawn on that layer represents material (copper, solder paste, ink)
Negative = Anything drawn on that layer represents absence of material (opening in solder mask)
Click to expand...

that is my guess
thanks a lot
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top