Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to easily convert +28V to +33V supply ?

Status
Not open for further replies.
D

djnik1362

Full Member level 2
Joined
Aug 9, 2010
Messages
136
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,298
Location
IRAN
Activity points
2,374
hi
We have a +28V supply in our system and we need a single +33V
in our circuit . Is there any simple solution that we use to provide
desired voltage ?

thanks.
 

Re: Convert +28V to +33V

Yup. Design a boost converter to boost the 28V to 33V.
 

Re: Convert +28V to +33V

djnik1362 said:
hi
We have a +28V supply in our system and we need a single +33V
in our circuit . Is there any simple solution that we use to provide
desired voltage ?

thanks.
Click to expand...

Hi djnik1362,

Is this SMPS?if there is a trimpot for trimming the output,you can adjust it by turning the trimpot then measure the output voltage.Some SMPS has a trimpot to trim the output.

regards,

spectrum17
 

Re: Convert +28V to +33V

how much current you need?
 

Re: Convert +28V to +33V

spectrum17 said:
Hi djnik1362,

Is this SMPS?if there is a trimpot for trimming the output,you can adjust it by turning the trimpot then measure the output voltage.Some SMPS has a trimpot to trim the output.

regards,

spectrum17
Click to expand...

i don't know. What the SMPS is ?
 

Re: Convert +28V to +33V

SMPS = Switchmode Power Supply
 
Re: Convert +28V to +33V

Check this out for more info: **broken link removed**
 

Re: Convert +28V to +33V

john blue said:
SMPS = Switchmode Power Supply
Click to expand...

yes. i prefer to use switching supplies.

---------- Post added at 03:37 ---------- Previous post was at 03:34 ----------
john blue said:
Check this out for more info: **broken link removed**
Click to expand...

thanks but i want to use devices such a step-up DC/DC converter.
i can't design any supply.
 

Re: Convert +28V to +33V

They will help you to design. Web based.

**broken link removed**

---------- Post added at 03:44 ---------- Previous post was at 03:43 ----------

They will help you to design. Web based.

**broken link removed**
 

Re: Convert +28V to +33V

@djnik1362

do you have schematics about your PSU?
Is is the 28V output comes from SMPS?If yes you can provide schematics so that i can help you to modify it from 28V to 33V.Since it is only increase with 5V the voltage divider reference can be trimmable.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top