Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Terms meaning of some tsmcN65 process PDK

Status
Not open for further replies.
rfcn

rfcn

Member level 2
Joined
Jun 18, 2010
Messages
42
Helped
4
Reputation
8
Reaction score
1
Trophy points
1,288
Location
China
Activity points
1,531
1. Capacitor
As mimcap means matal-insulator-matel capacitor, what crtmom stands for?

2. Inductor
spiral_std_mu_z: what _mu_z stands for?
spiral_std_mza_a: what _mza_a stands for?

3. What's mean by term "the 2.5V under-drive 1.8V cell" and "2.5V over-drive 3.3V cell"?

4. In the PDK name CRN65LP, LP means low power, but what CRN means?

5. Metal options:
In term 1p9m_6X2Z0U_ALRDL, what X,Z,U and ALRDL stands for?

6. TSMC 65NM CMOS Mixed Signal RF SALICIDE Low-K IMD 1P9M PROCESS
what IMD stands for here?

regards,
rfcn
 

1. crtmom means rotative metal capacitor. It has the fingers layout structure.
3. 2.5V under-drive 1.8V is a kind of device, the vcc can be 1.8V by changing gate length, no need any extra mask. So is 2.5V over-drive 3.3V. They are available in the N65 process with IO is 2.5V.
4. C is CMOS, R is RF, N is 'nano-'.
5. X means inter-layer metal, Z means top thick metal, U means ultra-thick top metal, ALRDL means Al redistribution layer.
6. Inter-Metal Dielectric.

BTW, the answer of most of your questions can be found in design rule, you'd better read design rule carefully.
 
  • Like
Reactions: TacuLee

    rfcn

    rfcn

    Points: 2
    Helpful Answer Positive Rating
    T

    TacuLee

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top