Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

DRC 90 nm to 65 nm migration, check shorts in DRC or LVS?

Status
Not open for further replies.
jitendravlsi

jitendravlsi

Full Member level 2
Joined
Jul 21, 2008
Messages
132
Helped
8
Reputation
16
Reaction score
5
Trophy points
1,298
Activity points
2,136
1)What do you face new in DRC when you go from 90nm to 65nm?

2)Where do you check shorts, in DRC or in LVS?
 

Re: DRC 90 nm vs 65 nm

I don't think there are much changes in the DRC/LVS stand point if you are transitioning from 90nm to 65nm.

But there are lot of additional DRC's rules being checked when you are transitioning from 65 to 40 nm or below techs.

In LVS you will be checking the shorts/opens.
 

    jitendravlsi

    jitendravlsi

    Points: 2
    Helpful Answer Positive Rating
Re: DRC 90 nm vs 65 nm

Dear thanks

I don't think there are much changes in the DRC/LVS stand point if you are transitioning from 90nm to 65nm.

But there are lot of additional DRC's rules being checked when you are transitioning from 65 to 40 nm or below techs.

In LVS you will be checking the shorts/opens.
Click to expand...

You have cleared my doubt regarding Shorts......
......................................................................thanks

I know more DRC rules are there for 65 nm.
Pease give me the list of those extra rules if you have.
or send me the doc/pdf if you have regarding this(DRC)
 

Re: DRC 90 nm vs 65 nm

any one please

put some extra light on this topic..........
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top