Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Warning system- Speaker vs Buzzer

Status
Not open for further replies.
J

Jayakarthick

Newbie level 5
Joined
Nov 18, 2009
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
bangalore
Activity points
1,353
Warning system

Hi all,
I am new to Embedded hardware,
my application is based on DSP processor. After processing my signals I have to generate 2 different warning alarms for say 2 critical conditions. My doubt is should I require a
1. DAC and Speaker combination(Am I making it complex) or
2. Simple circuitry as in Buzzer to produce warning alarm ??? (In this case can we generate a proper beep like sound)

can u share some info...
Plz help...

Thnx in advance... ;)
 

Re: Warning system

Why to make it complex when you can get two different audible indications with a simple Dc buzzer. As a buzzer sounds when power is applied, you have to just switch the power at diffrent intervals to dishtinguish between two situations. Mean switch on the buzzer for 1 sec on and 1 sec off for one condition and 0.5 sec on and 0.25 seconds off for other situation....Cheers
 
Re: Warning system

thnx pranam....
I ll try out with a simple DC buzzer circuitry....
:D
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top