Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Simulation of GPR environment

Status
Not open for further replies.
M

mohandesgpr

Newbie level 2
Joined
Jul 11, 2009
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,292
hello everyone

I am working now, in a project for simulating GPR environment using Microwave Studio.
Could any body help me in this by telling me from his/her experience about this issue:

1- is Microwave Studio is the most suitable for this ?
2- Is the FDTD method is the suitable method for the simulation?
3-How could i design the environment itself, and the GPR transmit and receive antennas?
4- what kind of data should i get from this simulation?


Thank you very much
 

I try to answer ypur questions
almost GPR project is create with Time Domain parameter.. it's different to make commonly antennas that use HFSS for frequency domain parameter..

1. I think XFDTD is easier than the other
2. FDTD is most suitable method
3. You must calculate couple radiation betwen TX and RX
4. -level (late time) ringing
-UWB bandwidth
-etc
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top