Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

best position for probe in microstrip patch ?

Status
Not open for further replies.
H

HaDaD

Newbie level 4
Joined
Nov 25, 2008
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,319
where is the best position for probe if we want best S11 at f0?
Is there any formula?
or we must try and error?
 

Hi

well if you have any EM simulator you can do parametric analysis and find the best position for the feed. normally it is at L/4 from the edge where L is the resonant length of a square patch


regards
 

    H

    HaDaD

    Points: 2
    Helpful Answer Positive Rating
thanks,
but its an approximation.
do you know any paper that discuss parametrically on prob position?

?
 

well i dont have any specific paper discussing parametric study on probe position but as i said you can easily do this yourself in any EM simulator


thanks
 

I think its
Z= cos²(ΠYo/L);
Where Yo is the distance from edge of the patch.
L-length of the patch antenna.

Cross check it.
 

Hi

yes i agree this is the analytical expression for the input impedance variation along the length of the patch.

regards
 

HaDaD said:
where is the best position for probe if we want best S11 at f0?
Is there any formula?
or we must try and error?[/quote
hi balanis antena theory book thay have give example problem
Click to expand...
 

what are the lengths of marked arm???
 

sorry,but i think u r not getting my question

see the pic..

plz help
 

nitin2735 said:
sorry,but i think u r not getting my question

see the pic..

plz help
Click to expand...
i am also searching many book . iam not getting nswer for this.
some books thay are telling that is equal to microstip feed lind width.W0
i also looking for the detailas. particularly feed design concept. do u have any other idea?
 

sundarmeenakshi said:
nitin2735 said:
sorry,but i think u r not getting my question

see the pic..

plz help
Click to expand...
i am also searching many book . iam not getting nswer for this.
some books thay are telling that is equal to microstip feed lind width.W0
i also looking for the detailas. particularly feed design concept. do u have any other idea?
Click to expand...

Dear Friend,

For rectangular microstrip patch look in ANTENNA THEORY ANALYSIS AND DESIGN(BALANIS) 3RD EDITION CHAPTER 14
For circular look in MICROSTRIP ANTENNA DESIGN HANDBOOK RELEVANT CHAPTER
 

i have an idea

take that width variable and see the best result
 

SO...
just: TRY & ERROR!
the best personal work!

thanks all

Added after 1 minutes:

SO....
TRY & ERROR and...
and enjoy?
:D

thanks all.
:!:
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top