Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

INTERFACE Details of FPGA

Status
Not open for further replies.
V

venkat25

Junior Member level 2
Joined
Jul 30, 2008
Messages
23
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,439
low cost vga fpga

Cab any tell me the functions of these interface (which are in the Spartan FPGA)

Interfaces
10/100/1000 PHY
JTAG programming/configuration port
RS232 Port
Low-cost VGA
4 SPI select lines

Thanks & Regards
Venkat
 

details about fpga

10/100/1000 PHY ---> Gigabit Ethernet Lan
JTAG programming/configuration port --> Interface for programming the FPGA
RS232 Port --> Serial port normally on back side of ur PC cabinet
Low-cost VGA --> U can connect a monitor to ur FPGA through VGA connector
4 SPI select lines --> ?? someting to do with (Serial Peripheral interface)
 

    V

    venkat25

    Points: 2
    Helpful Answer Positive Rating
Thanks soo much Teja... for your reply

Thanks & Regards
Muthamil

Added after 2 hours 18 minutes:

Could you help me, regarding the possible usage of these input pins...

Digilent 6-pin header -2
EXP expansion connector - 2
30-pin GPIO connector: can be used for System ACE™ Compact Flash daughter card (not included)

Is it possible to connect the add on board using this IO pins.

Actually i am try to sort out the advantage of Spartan-3A DSP 1800A FPGA

Thanks & Regards
Venkat
 

Normally these boards have extra connectors to which u can connect extra daughter boards (have to buy separately) depending on ur application or u can connect ur own designed board or use these connectors as general I/O.

Digilent 6-pin header -2
EXP expansion connector - 2
30-pin GPIO connector: can be used for System ACE™ Compact Flash daughter card (not included)

U can go through the user manual of the board to get more idea how the connectors on the board can be used.
 

    V

    venkat25

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top