Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

ARM USB-Serial Programming software

Status
Not open for further replies.
ivar

ivar

Junior Member level 1
Joined
Jun 29, 2008
Messages
18
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,281
Activity points
1,418
arm serial programmer

I have the hexfile and a usb to serial adapater that can connect to a serial port on my ARM kit. I need to download the file into the kit.

Is there a free/ open source ARM programming software that uses the usb to serial adapter (based on the ftdi chip) to download the hex file ?
 

arm usb serial

Free programming software is rather different depending which ARM device you are using. For example, for the LPC2000 series you can get free programming software from https://www.flashmagictool.com/ . This software is free for evaluation. For other manufacturers, you might want to check their websites, such as www.st.com or www.atmel.com or which ever device you have.

Hope this helps, Bob
 

    ivar

    ivar

    Points: 2
    Helpful Answer Positive Rating
arm usb to seriell

I have a Philips LPC 2129. The link given here was dead. Guess i will have to try Flash Magic. Thanks for the inputs.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top