Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Bandgap @ 0.9 and 2.1 V

Status
Not open for further replies.
B

benslama ahmed

Newbie level 6
Joined
Jan 24, 2008
Messages
11
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,347
Hi friends
I have designed a bandgap reference without OPA at 1.2V ,Now i would have a reference at 0.9 and 2.1V
please help
thx
 

I didn't understand your meaning.
1. U designed a BGR at 1.2V power supply, and now u want the BGR still work at 0.9V and 2.1V power supply.

2. U designed a BGR at 1.2V power supply, and now want designed another BGR to work at 0.9~2.1V power supply.

Or u want others. Please talk us other details, such as the output of BGR, process etc.
 
I want a bangap wich generate a Vout=0.9V and 2.1V
the power supply is Vdd=3V
thx
 

bangap generates 1.2 V
for other reference voltages you need opamp and resistors
 
It seems you are using 0.35 technology?

@pixel: op-amps are not necessary for non-bandgap references
 
malizevzek said:
It seems you are using 0.35 technology?

@pixel: op-amps are not necessary for non-bandgap references
Click to expand...


ok.. i thought on standard bangap with bipolars...
Which non-bandgap reference can give 2.1V ? Usually thoose with mosfets are at ~500 mV
 
You can refer to Problems 11.17 of Razavi's textbook.
 
Widlar referece may help you. You can derive a referece voltage at 2.1V first, then divide it with res to get 0.9V. This may be a relative low cost solution, however more res means more noise.

ELE
 
hi friends
i have some problem to design the resistor divider
it works at big values of R1 and R2 and i will have some problems to implement it.
i need help
regards
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top