Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to test and measure an antenna radome?

Status
Not open for further replies.
A

AmirMohammad

Member level 2
Joined
Apr 7, 2007
Messages
48
Helped
5
Reputation
10
Reaction score
3
Trophy points
1,288
Activity points
1,601
Hi
I have an antenna radome. how can i test it? and what are its important parameters or characterristics which should be measured?
 

Re: Radome Measurement

Two that come to mind are 1) does the antenna impedance change with and without the radome? and 2) how is the radiated field affected?
 
Radome Measurement

On top of that,
maybe you can also look at the mechanical design of the radome. For example, hardness so that it can protect the antenna inside.
 
Re: Radome Measurement

Hi Amir
place the antenna on a VNA and compare with or without radome. If the filter frequecy of antenna moves after placing the radome, you may be able to enlarge,redce the size of the antenna to compensate for the loss and bring antenna backinto frequency with the radome on it
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top