Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

help me with my current div process!

Status
Not open for further replies.
E

enigma^6

Junior Member level 1
Joined
Jan 21, 2008
Messages
16
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,397
Current Division HELP?

This is a VERY elementary question ...I'm very confused with this Current div process... PLease Help me

hxxp://obrazki.elektroda.pl/96_1201062710.jpg

I understand the I total part for both equation. I'm a bit confused with th current division part. What is the 3 ohm from (6/(6+3).. is it the 3 near 20 v? or the one near Isc?

any help will be great... thanks
 

Re: Current Division HELP?

Hi,
It is the one near ISc, since you are finding ISc through it. The current from 20V is getting divided between 6 Ohms and 3 Ohms near ISc which are in parallel when ISc is short. In a parallel combination of two resistors R1,R2; the current through R1 = Iin*R2/(R1+R2), just as in a series combination of R1,R2 the voltage across R1 = Vin*R1/(R1+R2).
Regards,
Laktronics
 

    E

    enigma^6

    Points: 2
    Helpful Answer Positive Rating
Re: Current Division HELP?

hello,

maybe this site will help

**broken link removed**


regards,
myql
 

    E

    enigma^6

    Points: 2
    Helpful Answer Positive Rating
Re: Current Division HELP?

laktronics.. thanks for that clear explanation... Now i get it .. Thanks again!! :D

myql... Thanks for the link... I will bookmark that site for future reference

Thanks again guys! :D

:D:D:D
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top