Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Please help me to find the number (50 Points + 1 Helped)

Status
Not open for further replies.
folks

folks

Full Member level 3
Joined
Oct 30, 2006
Messages
179
Helped
32
Reputation
64
Reaction score
14
Trophy points
1,298
Location
Guadalajara
Activity points
2,337
I want to buy the wires showed in the picture but I can not find the name or part number in Digikey :cry:. They are for connect 2 pins in two boards.
Somebody know its name or part number in Digikey?
Thanks

ters.jpg
 

Recommend send an email request to digikey web support. You should get feedback pretty quick.
Or call their 800 numbers if you are in USA or Canada. :)
 

buy the plugs and wire seperately,
u can make urself.
go through RS Catalogue
 

    folks

    folks

    Points: 2
    Helpful Answer Positive Rating
Refert yourself to the catalog of the vendor.
 

    folks

    folks

    Points: 2
    Helpful Answer Positive Rating
Here is another hint, try to check wether these wires are multi strands or not? then measure guage and then look into the different vendors catalogue, they will offer you a role of different length typically small wires with 100m etc. Also you have to order pins/plugs separately (and/or shrinkable sleeve if required) and ofcourse pins crimping tool too.

I cannot judge through pic, but seems/guess to be 24 guage,

Regards
 

    folks

    folks

    Points: 2
    Helpful Answer Positive Rating
check this place
**broken link removed**
 

    folks

    folks

    Points: 2
    Helpful Answer Positive Rating
Thanks to all.
But I still not find the number :cry:. I think they sell together Plug heder and wire, like jumper wires.

Any way, I give to all 1 help
 

why are you intrusted in buying it, just take the accesories and make you own.
 

because I do not have enough time to build it and I will buy several
(500 to 1000 wires)
 

folks said:
Thanks to all.
But I still not find the number :cry:. I think they sell together Plug heder and wire, like jumper wires.

Any way, I give to all 1 help
Click to expand...

Did you look at the link that radiotech posted above?

**broken link removed**

Seems to be the same function as your request, except multi-color. Probably much cheaper to make yourself, but as you said your time is busy :D

Lefty
 

    folks

    folks

    Points: 2
    Helpful Answer Positive Rating
Maybe this will help. It's roughly similar to your original wires. Not cheap.

Page 111 of the current (T073) DigiKey catalog:
Hirose "Interconnect Wire" of various lengths, gauges, colors, with attached contacts (that's a big help).
You buy the housings separately, and snap them together (instead of shrink tube).
Ask DigiKey if they can help do the assembly.
 

    folks

    folks

    Points: 2
    Helpful Answer Positive Rating
echo47 said:
Maybe this will help. It's roughly similar to your original wires. Not cheap.

Page 111 of the current (T073) DigiKey catalog:
Hirose "Interconnect Wire" of various lengths, gauges, colors, with attached contacts (that's a big help).
You buy the housings separately, and snap them together (instead of shrink tube).
Ask DigiKey if they can help do the assembly.
Click to expand...

Is just what I was seeking, they have wires.
Here is your 50 points and your helped :D
Thanks echo47
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top