Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

High distance Microphone (help)

Status
Not open for further replies.

arash_micro

Member level 5
Joined
Jan 25, 2005
Messages
91
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
739
distance microphone

Hi all.
I want to make a long distance Microphone (for example 30 meter or something ).
Can you help me.
Thanks.
 

long distance microphone

I had great success with a shotgun microphone which I constructed from an old (VERY OLD) magazine article. Fortunately, I have the original article scanned and stored. (Who says it's BAD to hoard stuff!!!)

When I built mine, I metricated all the dimensions and reduced the pipe diameter a bit. The original used an electret mic insert, but I upgraded it to a "real" mic insert which I salveged from a mic with a damaged body.

I built a small but high quality mic amp, powered from a 9V battery which was built into the microhone assembly.

I have used mine for many years (I am a pert-time wildlife film-maker) with great success. I is a bit unwieldy, but when mounted on a tripod alongside the camera, the results are impressive.

I would imagine that plastic tubing (high density) would work just as well as the aluminium tubes I used in the original.

Enjoy.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top