Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

analog devices software for pll synthesizers

Status
Not open for further replies.
M

m_uzman

Newbie level 6
Joined
Aug 5, 2006
Messages
11
Helped
3
Reputation
6
Reaction score
1
Trophy points
1,283
Activity points
1,361
hi
has anybody used the software that comes with the evaluation boards of pll from analog devices..

I am having problem with my evaluation board and I want to check if the software has loaded the registers successfully.. the software does not give any indication whether loading was successful or not.
 

I have not used the specific software, however you can monitor the MUX output of the PLL IC with an oscilloscope. You can then see if the registers are programmed by looking at reference divider, etc..
 

    M

    m_uzman

    Points: 2
    Helpful Answer Positive Rating
..I'll try that. hope that will work ..thanks
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top