Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to wind a 350nH accurate inductor

Status
Not open for further replies.
Air coil ??
If it's so, use Nagaoka formula that can be found everywhere but these coils will absolutely require tuning.
You can not obtain exactly 300nH+-%0.5 tight tolerance with air coils.Also, these values are not standard values as can be found SMD or any kind..
 
ACCURATELY? - how accurate? - can you measure this accurately? - how accurate is your measurement system?

Standard values are to avoid people having to ask how to make a simple fixed value component.

Standard values ALL have a tolerance. There is no such thing as an exact value in the real world.

Good designers do not require exact values - these are avoided by good design.
The design need only be FIT-FOR-PURPOSE and no better.

Polymath
 
You should use L meter when winding inductors. Formula gives you no guarantee the coil will be accurate wound.
 
In EDA there is software in the link / updownload section...
 

jjohn said:
In EDA there is software in the link / updownload section...
Click to expand...

Well, what's the name of that software? I dont know where's the upload section, please copy and paste download link..

Thanks in advance,
Ahmad,
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top