Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Delayed one shot using a 555

Status
Not open for further replies.
P

payman

Newbie level 4
Joined
May 8, 2006
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,320
555 delayed one-shot

Hi,

how do I set up a circiut with a 555 chip to produce only one pulse after about 10 seconds?
 

you can't. you need to use two 555's... or one 556. Set the first one for 10 seconds, and connect it's output to the second 555's trigger via an edge trigger (a small cap with two pull-up resistors on either side).
 

    P

    payman

    Points: 2
    Helpful Answer Positive Rating
So set the length of the pulse for 10 seconds or the length of the delay to 10 seconds for the first one?
 

first one times for 10 seconds, then set off the second which times for however long the pulse should be, maybe 1 ms
 

    P

    payman

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top